With the Procella P610 bracket you can upgrade your P6 Mk2 LCR speaker to a full range LCR speaker simply by adding one P10Si Mk2 subwoofer to your P6 Mk2 and mount them together with the P610 bracket. You will need a DSP amplifier for the crossover such as the DA03-DSP (2-channels) or the DA08-DSP. Select the preset and you are done.
Swivel bracket designed for easy and flexible wide/height channel installation. Made for the P5-series and P6-series loudspeakers. The bracket is a swivel and rotatable wall/ceiling mount. This mount is a great choice when you want the ultimate flexibility for your P5 or P6 speakers. Effortless pull the speaker out from the mount, position it in almost any direction then smoothly return it to the wall or ceiling when finished.
With the Procella P815 bracket you can upgrade your P8 LCR speaker to a full range LCR speaker simply by adding one P15Si subwoofer to your P8 and mount them together with the P815 bracket. You will need a DSP amplifier for the crossover such as the DA-2800DSP (2-channels) or the DA-06DSP. Select the preset and you are done.
With the Procella P860 bracket you can upgrade your P28 LCR speaker to a full range LCR speaker simply by adding one V6 subwoofer to your P28 and mount them together with the P860 bracket. You will need a DSP amplifier for the crossover such as the DA-2800DSP (3-channels). Select the preset and you are done.
“The new P5 really is an extraordinary speaker! It is almost unbelievable when you are listening to P5 to imagine the size of them, because they sound so much bigger. The new P15A is a perfect companion since it sounds very good and is very easy to install in most rooms.” MARCUS, The Rock Hemmabio
The P5 delivers the full dynamic range experience to smaller rooms and rooms with multiple surrounds and height speakers.
“Fabulous dynamics but gets the subtle nuance of movies and music correctly as well” RANDY, Procella speaker owner
A true high-performance in-wall in-ceiling speaker for main, surround, and height speakers, the P5iW makes Procella performance unobtrusive in any room.
With one or more of the larger Procella subwoofers used as a main subwoofer, P10Si subwoofers (typically one to three) can be placed in different room locations to smooth the low frequency modes of the room.
The P10Si Mk2 has a very small footprint for maximum flexibility, the P10Si Mk2 can optimize low frequency performance in combination with any Procella subwoofer. When properly applied using DSP, this technique improves the system’s overall bass quality and significantly reduces the seat-to-seat variance in low frequency levels found in small rooms using a single subwoofer.
The C10 is a very high power Surround Loudspeaker for small and medium cinema’s. Designed for side wall installations in theaters less than 15m wide. The 10″ high power low frequency driver combined with a High Frequency Compression driver on elliptical constant directivity waveguide gives it a 121dB continuous and 127dB peak SPL. Constant directivity:
90° horizontal x 40° vertical above 1.6 KHz. The C10 includes a wall bracket and has integral integral M6 threaded inserts provided on enclosure sides, top and bottom for easy and safe installations.
“We have already chosen the speakers (for our demo/test room): it must be the P6 / P15 from Swedish Procella. These compact but potent speakers are not only one of the most powerful theater systems we’ve heard, but they are also extremely revealing and is therefore a useful tool when we test home cinema amplifiers and other electronics.“ LJUD & BILD magazine
Compact and elegant, the P6 brings Procella reference quality audio and a very wide dynamic range in a slim-profile cabinet (only 5.3” deep) that makes for easy integration with flat-screen televisions, projection screens, and surround speaker environments.
“With seven identical satellites and a brutally powerful subwoofer with dual 15-inch drivers crossed over at 80 Hz, the P6 / P15 system is a tough reference to compare other equipment with and against.” LJUD & BILD magazine
The P6V fits elegantly to the side of projection screens or flat-panel displays, and it also can be made to easily disappear into custom-built columns when used as a surround speaker.
“We have already chosen the speakers (for our demo/test room): it must be the P6 Mk2 / P15 from Swedish Procella. These compact but potent speakers are not only one of the most powerful theater systems we’ve heard, but they are also extremely revealing and is therefore a useful tool when we test home cinema amplifiers and other electronics.“ LJUD & BILD magazine
Compact and elegant, the P6 Mk2 brings Procella reference quality audio and a very wide dynamic range in a slim-profile cabinet (only 125mm / 4.9” deep) the improvement is in the transparency and detail because of the new Neodymium high frequency compression driver and the new upgraded crossover. The P6 Mk2 is perfect for an easy integration with flat-screen televisions, projection screens, and immersive speaker environments.