The Procella DA08-DSP is the first amplifier which is Designed by Procella Audio (Manufactured in China). The DA08-DSP has massive output power and can drive every Procella loudspeaker and subwoofer.

Delivering a solid 800W per channel at 8 ohms and 45A current this new Class-D amplifier will ensure a wide dynamic range with low-frequency impact and a transparent and musical sound quality that will satisfy the most critical listener.

This four-channel amplifier has 15 presets for all Procella subwoofers and full range speakers, from the P610 Mk2 to the V21 subwoofer.


The DA08-DSP is massive output power amplifier and has the horsepower to bring out every ounce of performance designed into each of Procella’s high-output speaker and subwoofer models.

Procella’s DA08-DSP can be used as a four-channel amplifier to produce 4x800W (8 ohms) and 4x1600W (4 ohms), but switch to bridge mode, and it will deliver 2x3200W (8 ohms) and 2x5800W (4 ohms)!

In a single rack unit, this power station ensures maximum output and dynamic range, especially for Procella subwoofers.

15 factory presets enable multiple configurations with Procella’s high output speakers and subwoofers.


Output power @ 4Ω/8Ω

4x 800W

Max. Output current

45A peak

Signal To Noise-Ratio

>105 dB
A-weighted, 20 Hz-20 kHz, 8 Ω

THD+N (typical)

<0.05% (20 Hz – 20 kHz, 8 Ω load 3 dB below rated power)

Frequency Response

20 Hz – 20 kHz (+0/-0.5 dB
8 Ω load, 3 dB below rated power)

Protection Circuits

Short circuit protection, DC protection, Limiter, under voltage protection, over temperature protection, overload protection

Operating Voltage/Frequency

Universal Mains, 90-260V, 50-60Hz

Carton content

Mains power cable, Adhesive rubber feet 4x, User guide

Dimensions WxDxH /Net weight

483 x 45 x 370 mm (1U) / 19” x 1.7” x 14.6”, 9,0 Kg / 19,8 Lbs

Shipping Carton WxHxD / Shipping weight

570 x 135 x 515 mm / 22,44”x 5,31”x 20,28”, 10 Kg / 22.05 Lbs


Designed by Procella Audio, Manufactured in China